Welcome to Würth Poland For trade customers only

Wyłącznie dla firm

Infolinia +48 22 510 20 10

Faktura VAT

Szybka dostawa

Ponad 125 000 produktów

2C cartridge foam PURlogic® Sprint

2C cartridge foam PURLOGIC Sprint
DRFRMFM-2C-PURLOGIC-SPRINT-CART-210ML

Art.-no. 0892146
EAN 4045989985005

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

2C cartridge foam for fast and easy door frame installation, non-stick after just 3 minutes

Very quick to reach final strength


Reduces expansion time to 20 minutes. This saves time and costs



Good adhesive properties


Adheres well to various wall joint and frame materials



Dimensionally stable foam


  • No pressing during and after the hardening phase

  • < 5% dimensional change, tested in accordance with ift directive from the ift Rosenheim Institute in Germany.


For installing wooden and steel door frames


Tested in accordance with ift directive from ift Rosenheim in Germany.



General test certificate from construction authorities


Corresponds to building material class B2 in accordance with DIN 4102, Part 1, tested by MPA Hanover in Germany.



High compressive load



Uniform, fine-celled foam structure



High degree of emptying



Resistant to ageing

Notice

Adheres to concrete, stone, hard PVC, metal and wood. Does not adhere to polyethylene, silicone, PTFE and grease. Primer should be used for porous and absorbent substrates. Store upright cartridges in a cool, dry and frost-protected place. Protect from heating up to over +30°C.


At higher temperatures, the storage time is reduced.



One cartridge is sufficient for 6 mounting points, this is the quantity for a door frame, step or window sill of size 1000 mm x 300 mm. Immediately remove any fresh flecks of foam with PURlogic® Clean. Hardened foam can only be removed mechanically.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Certificates/ Documents

 | 

 | 

Application area

For high-quality and secure installation of wooden and steel door frames, steps in staircases and window sills (lining must be used to protect against excessive compressive load). Sand beige colour provides visual confirmation of installation. Adheres to concrete, stone, hard PVC, metal and wood

Instructions

Align door frames using installation aids:


Door frames and masonry must be load-bearing, clean and free from oils, grease and dust.


Insert the enclosed cardboard strips at the mounting points. Also use extension tube for narrow and deep joints. The mixing tube should be removed after using the foam or when you need to interrupt work. Immediately remove fresh splashes of foam with PURlogic® Clean, art. no. 0892 160. Pretreat plaster and aerated concrete with primer.



Bonding stairs:


Align components such as steps, door sills or window sills to spacers. The spacer is designed to produce an expansion joint of 5-15 mm. It is possible to apply adhesive in two ways, depending on the component size and the conditions:



  • 1 Remove the component already aligned. Apply adhesive strands lengthways or crosswise at a spacing of 8-10 cm. Re-position the component immediately on the spacer. Use 2 weights per 15 kg for each spacer.

  • Insert the adhesive strands into the expansion joint between the component and surface lengthways or crosswise at a spacing of 8-10 cm. For instance components such as steps, window sills or door sills, use 2 weights per 15 kg per spacer.

  • Hardened expansion adhesive can be cut after 8-10 minutes.

Chemical basis

Mix of polyether polyols, diphenylmethane-4, 4'-diisocyanate

Colour

Brown beige, similar to RAL 1011

Smell/fragrance

Characteristic

Moulded density

50 kg/m³

Conditions for moulded density

foamed into joints, tested in accordance with Würth test methods

Cell structure

Medium - fine

Cell structure conditions

tested in accordance with Würth test methods

Working life

1 min

Tack-free after

3 min

Conditions for being tack-free

tested in accordance with Würth test methods

Can be cut after

7 min

Conditions for ability to cut

tested in accordance with Würth test methods

Full resilience

30 min

Conditions for full resilience

tested in accordance with Würth test methods

Final spreading possible after

20 min

Conditions for final spreading

at 20°C and 50% relative humidity, tested in accordance with Würth test methods

Min./max. processing temperature

10 to 25 °C

Min./max. ambient processing temperature

10 to 25 °C

Min./max. surface processing temperature

10 to 25 °C

Min./max. processing temperature for can

10 to 25 °C

Min./max. temperature resistance

-30 to 80 °C

Max. short-term temperature resistance

100 °C

Compression strength

8 N/cm²

Compression strength conditions

based on DIN 53421, at 10% compression

Min. combined tension and shear resistance

9 N/cm²

Conditions for combined tension and shear resistance

in accordance with DIN 53427

Min. tensile strength

10 N/cm²

Conditions for tensile strength

in accordance with DIN 53455

Elongation at break

19 %

Elongation at break conditions

in accordance with DIN 53455

Yield (volume) approx.

5 l

Conditions for yield

Tested in accordance with Würth test methods

Contents

210 ml

Weight of content

254.1 g

Building material class

B2 - Normally inflammable

Building material class conditions

in accordance with DIN 4102

Resistance against

Aging

Shelf life from production

9 Month

Conditions to maintain shelf life from production

cool and dry storage area below 25°C

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Mixing tube For PURLOGIC® Sprint and PURLOGIC® Turbo 2C cartridge foam

MIXTUB-(CARTFM-2C)

x 20 pcs
2C foam gun PURlogic® Twinpress

FMGUN-2C-PURLOGIC-TWINPRESS

For applying 2-component foams, 2 x 110 ml
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information