Wyłącznie dla firm
Infolinia +48 22 510 20 10
Szybka dostawa
Ponad 125 000 produktów
Primer spray
SPRPRIM-(BUTYL-BITU)-TRANSP-500ML
Register now and access more than 125,000 products
Improves adhesive strength
- Considerably increases the reliability of adhesion by forming a stable film on the surface
- Rough and porous surfaces are strengthened
Simple spray application
- Quick application
- Spray head can be twisted to spray horizontally or vertically
Flash-off time:
- Approx. 20 mins at +5 °C
- Approx. 30 mins at 0 °C
- Approx. 40 mins at -5 °C
Not compatible with paint. Paints, lacquers and plastics may be softened. Compatibility with adjacent materials must be tested.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
For pre-treating the surface when applying Würth butyl and bitumen tapes and window sealing tapes with butyl strips. Also suitable for Eurasol Thermo HT. For porous and absorbent surfaces such as concrete, gypsum, wood, masonry, autoclaved aerated concrete, plaster and cement stone, a primer should be applied for optimum adhesion.
The surface must be dry and free from dust or grease. Remove any paint residue, waterproofing agents and concrete and cement skin.
Cover adjacent surfaces and the floor. Spray evenly on the surface; repeat the process on highly absorbent surfaces. Protect the sprayed surface from dust and moisture. Clean the spray head with Würth PU cleaner when not using the spray. The tape can be applied after the specified flash-off time.
Chemical basis | Solvent-containing synthetic natural rubber |
Colour | Transparent |
Contents | 500 ml |
Min. flash-off time | 10 min |
Min./max. processing temperature | -5 to 35 °C |
Coverage distance | 50 m |
Conditions for coverage distance | with 4-cm spray width |
Shelf life from production/conditions | 12 Month / at 20°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!